19
PH: 866.476.9217
IX. BATTERY TROUBLESHOOTING
TROUBLE
PROBABLE CAUSE
RECOMMENDED ACTION
One (1) LED is
flashing
1.
The Battery is almost
depleted.
1.
If necessary, press the charge read
button and check the LEDs to read
the charge level. If the Battery is
almost depleted (<25%), it must
be recharged.
GO-B3
automatically
switches OFF.
1.
Electronics have
activated automatic
protection mode.
2.
Long, continuous
overloading of the
Opener
3.
Safety shutdown
1.
A warning signal sounds
(continuous beeping). Beeping
stops after 30-seconds or when
Trigger is released.
2.
Activates the temperature cut-out.
Allow the GO-B3 Opener to cool.
NOTE: If the Battery feels very
warm, the Battery will cool more
quickly in its “Air Cooled” Charger
and is operated it at idling speed.
3.
If the slew rate of the current is too
high (for example, if the GO-B3
suddenly seizes or kickback
occurs), the Opener turns OFF.
Switch the Opener OFF at the
Trigger. Switch it ON again and
continue to work as normal. Try to
prevent the Opener from seizing.
NOTE:
The LED lamp switches OFF
automatically after a specific time.
To activate the electronic functions,
press the Trigger.
GATE OPENER REPAIRS
After extended use of the
GO-B3
Gate Opener, or in the case of degrading
performance or other apparent damage, send the
GO-B3
Gate Opener to
WORKMASTER’s
Authorized Service Center:
AIRMATIC
, 284 Three Tun Rd,
Malvern, PA 19355 for repair. The unit must be properly packaged for shipping.
