Breaking Down for Small Entryway
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
7
In some circumstances, it may be necessary to disassemble the press to fit through a small
entryway. If you are having difficulty moving your press through a small door or entryway,
follow these simple instructions, otherwise turn to page 8.
1. Take a wrench and remove the bolt that sits on
top of the cap on the upper carousel wheel. Lift
cap off to expose center shaft.
2. Lift the upper carousel wheel off of the center
shaft. Set aside and remove the lower wheel off
of the center shaft as well.
3. Odyssey should be in 3 smaller pieces and will
now easily fit through a small doorway.
4. Once through the door, return the lower wheel
and the upper wheel back on the center shaft.
Place the cap on top of the upper wheel and
secure the bolt in place with a wrench.
