Assembly
3730 E. Southern Avenue, Phoenix, AZ 85040 USA
800-778-8779
Workhorseproducts.com
10
Step 2: Installing the Pallet Arms
PARTS NEEDED
TOOLS NEEDED
PALLET ARMS (Item #3)
1/2” WRENCH
HEX TAP BOLTS (Item #8)
LOCK WASHERS (item #9)
*quantity of parts depends on model being assembled
1. Match up number on pallet arm to
number on lower wheel bracket. Place
pallet arm into the lower wheel bracket.
Line up pre-drilled holes on pallet arm
to pre-drilled holes on the bottom of
bracket.
2. Locate pre-drilled holes at the bottom
of the bracket and use four hex tap
bolts and four lock washers to secure
one pallet arm into place. Tighten bolts
using 1/2” wrench.
3. Repeat for each additional arm.
**Do NOT use hex nuts to hold in place or
you could bend the pallet arm.**
8
9
