WORKHORSE CUSTOM CHASSIS
Service Manual
2007 W Series
SECTION
7.2
PAGE
172
Automatic Transmission – Allison
2007 W Series Chassis
© 2006 Workhorse Custom Chassis — All Rights Reserved
WSM082106
DTC P0716
Step
Action
Value
Yes
No
6
IMPORTANT:
Do not rotate the speed sensor in the retaining bracket.
Do not rotate the speed sensor in the retaining bracket.
Orientation is fixed, and if changed, may cause improp-
Orientation is fixed, and if changed, may cause improp-
er operation.
er operation.
Replace the turbine speed sensor. Refer to Speed Sensor
Replacement.
Did you complete the replacement?
—
Go to Step 7
—
7
Perform the following procedure in order to verify the repair:
1. Clear the DTC.
2. Using the scan tool, monitor the turbine speed sensor operation.
3. Select Specific DTC.
4. Enter DTC P0716.
Has the test run and passed?
—
Go to Step 8
Go to Step 2
8
With the scan tool, observe the stored information, capture info, and
DTC Info.
Does the scan tool display any DTCs that you have not diagnosed?
—
Go to Diagnostic
Trouble Code
(DTC) List -
Vehicle
System OK
