WORKHORSE CUSTOM CHASSIS
Service Manual
Automatic Transmission – Allison
2007 W Series
© 2006 Workhorse Custom Chassis — All Rights Reserved
SECTION
7.2
PAGE
109
2007 W Series Chassis
WSM082106
DTC P0218
Step
Action
Yes
No
5
Inspect the torque converter stator for damage.
Refer to Torque Converter Diagnosis Procedure .
Did you find and correct the condition?
Go to Step 6
Go to Symptoms -
Automatic Transmission
6
Perform the following procedure in order to verify the repair:
1. Clear the DTC.
2. Using the scan tool, monitor the TFT.
3. Start the engine.
4. The TFT must be less than 122°C (252°F) for at least 10 seconds.
5. Select Specific DTC.
6. Enter DTC P0218.
Has the test run and passed?
Go to Step 7
Go to Step 2
7
With the scan tool, observe the stored information, capture info, and DTC Info.
Does the scan tool display any DTCs that you have not diagnosed?
Go to Diagnostic
Trouble Code (DTC)
List - Vehicle
System OK
