Technical data:
Rated power
600 W
Cutting depth wood
65 mm
Cutting depth steel
6 mm
3 oscillation stages
Stroke rate
800-3,000/min
Rated voltage/frequency
230 V ~ 50 Hz
Sound pressure level
L
PA
90.2 dB(A)
Uncertainty
K
PA
3 db(A)
Noise level
L
WA
101.2 dB(A)
Uncertainty
K
WA
3 db(A)
Oscillation emission value:
a
h
= 8.209 m/s²
Uncertainty
K
cw
= 1.5 m/s²
Mitre cut
up to 45° (left and right)
Weight
1.86 kg
Protection class
II
Wear ear protection, protective goggles,
dust mask and gloves
Do not use in rain; protect from wetness
Keep other persons at a distance
Read operating instructions
AHS GmbH, Uhlandstraße 50, A-4600 Wels
The oscillation emission value indicated in these instructions was measured according to
a measuring procedure standardised in EN60745 and can be used for the comparison of
power tools to each other. It is also suitable for a preliminary estimation of the oscillation
load.
The indicated oscillation emission value represents the main applications of the power
tool. However, if the power tool is used for other applications or with deviating insertion
tools or if it is not maintained properly, then the oscillation levels may deviate. This
can clearly increase the oscillation load across the entire working period. For an exact
estimation of the oscillation load, the times when the device is switched off or when
it is running but not actually in use should also be taken into account. This can clearly
reduce the oscillation load across the entire working period. Determine additional safety
measures for the protection of the operator against the effects of oscillations, such as:
Maintenance of power tools and insertion tools, keeping hands worm, organisation of
working procedures.
Intended use
The power tool is intended for the sawing of wood, iron, non-ferrous heavy metal and
plastic, using the corresponding saw blades.
13
1247870_Stichsäge_WB 600 PS_BDA.indd 13
1247870_Stichsäge_WB 600 PS_BDA.indd 13
18.01.21 09:38
18.01.21 09:38