FUNCIONAMIENTO BASICO
Carga y expulsión del disco
Abra la badeja
Cuando la bandeja este cerrada, presione la
tecla OPEN/CLOSE para abrirla (Esto tambien
puede hacerse desde la unidad remota).
Coloque un disco en la bandeja
Presione la tecla OPEN/CLOSE para cerrar la bandeja.
La bandeja debería cerrarse y la preparación para la
ejecución del disco, comenzar.
Cuando la preparación está completa, serán mostradas el
número de pistas totales y su duración.
A la pletina deseada
- 19 -
- 6 -
22. ON/OFF (Sound Effect)
Press this button to activate or deactivate the sound
effect. While the effect is activated, the LED under the
relative number is light; it’s blinking while the effect is
deactivated.
23. BRAKE
To change the speed of PAUSE and START, dial the
JOG WHEEL for adjusting to the desired speed. The
LCD will display BRAKE after this button is pressed.
This sound effect can be performed independently, or in
parallel with other effect.
NOTE:
How to set up the parameter; please refer to
parameter set up instruction.
24. RELAY
Press the “RELAY” button to activate. When one unit is
in play mode, and the other unit is in
“
pause” mode;
pause the playing unit, the other unit will automatically
start to play (the button will blink).
25. PROGRAM BUTTON
You can program the track you want. While the unit is
stopped, pressing the PROG button first to enter
memorized mode, by pressing the skip buttons to select
the tracks you want to order and then press the PROG
button again to compete set up per track. The max
tracks you can program are
3
0 tracks. While playing
programmed tracks, the LED of PROG lights up. While
the unit is stopped, open the tray disc or turn off the
power, the program will be exit.
26. BPM BUTTON
You can get the BPM number automatically or manually.
By pressing the BPM BUTTON to activate the automatic
BPM control. The BEAT will be shown on the display!
Pressing the BPM BUTTON for about 3 sec enable you
to get the BEAT manually by tapping this button to
adjust the beat value. Pressing for 3 sec again to leave
manual control!
27. CONNECTOR PORTS
The 8-pin(6-pin) termination permits the connection of
the control unit to the main unit.
28. SLEEP:
Leave the unit unused for 30 minutes; the machine will
shut off automatically.
29. DISC IDENTIFY
Recall the 5 HOT CUE memories each time while the
disc is reloaded. Each disc 5 cue points, and MAX 255
disc.
a. Hot cue points setting first.
b. Pressing the “MEMO BUTTON” for over 3 sec to
memorize the cue points. If the green LED lights up, it
present you complete the setting.
c. If you re-load the disc again and you want to recall the
hot cue point, you need to press the MEMO button for
about 3 sec( green LED lights up).Then the unit will
recall the hot cue automatically.
NOTE:
1. No matter you memorize the hot cue
in unit 1 or 2, you can recall the hot cue
from any unit. The machine can search
the cue memorization by itself.
2. There are 2 ways for you to memorize
the HOT CUE. Please refer to point
17 or 29.
