Worcraft MST14-210, Instruction Manual

Page: 55 / 70

Mitre saw
INTENDED USE
The power tool is intended as a stationary machine for making straight cuts in wood with and against the grain. It is possible to
cut mitre angles of -45
° to +45° and bevel angles of 0° to 45°.
The power tool is designed with sufficient capacity for sawing hardwood and softwood.
This power tool is not suitable for sawing aluminium or other non-ferrous metals.
TECHNICAL SPECIFICATIONS
Model MST14-210(J1G-ZP-210E-1) Straight cut at 0
0
x 0
0
120x55mm
Rated voltage 230-240V~ 50Hz Mitre cut at 45
0
x 0
0
120x30mm
No-load speed 5000 /min Bevel cut at 0 x 45
0
83 x 55mm
Blade size
Ø210mmxØ30mmx24T
Combined mitre cut at 45
0
x 45
0
83 x 30mm
Laser type Class II Sound Pressure Level LpA=100 dB(A) k=3dB(A)
Angle of mittre table -45
0
/0
0
/ +45
0
Sound Power Level LwA=113dB(A) K=3dB(A)
Bevel cutting angles 45
0
to the left Vibration Level ah=2.382m/s
2
, K=1.5m/s
2
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However if the tool is used for different
applications, with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may
significantly increase the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it
is running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories,
keep the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention! Pull out mains plug immediately, if the mains cable is
damaged, entangled or severed. Always remove the
mains plug before working on the device.
Read the manual.
Wear hearing protection. Exposure to
noise can cause hearing loss.
Wear safety goggles. Wear a dust mask.
Keep hands away from the cutting area
while the power tool is running. Contact
with the saw blade can lead to injuries. Danger zone Keep hands, fingers and
arms away from this area.
Laser radiation
Do not stare into the beam
Laser class 2 Electrical appliances must not be disposed of with
the domestic waste.
PRODUCT ELEMENTS (Fig 1 & 2)
1 Laser light 10 Blade cover screw 19 Switch trigger
2 Laser light on/off switch 11 Dust bag 20 Mitre lock knob
3 Saw arm 12 Bevel lock 22 Spindle lock
4 Release knob 13 Bevel scale 28
45
°
Bevel adjustment screw
5
Operating handle
14
Fence
29
0
°
Bevel adjustment screw
6 Upper fixed blade guard 15 6mm Hex key 30 Lock-off knob
7
“G” Clamp
16 Mitre table 31 Side support bars (x2)
8 Rotating blade guard 17 Mitre scale
9 Guard retraction arm 18 Table insert
SAFETY