water
from water tanks and natural water sources. It’s
IMPORTANT that the water is clean and the WORCRAFT inlet
filter is clear and fitted to the machine.
Open tanks/containers and natural water sources
Use the Self Priming accessory kit comprising:
–
Inlet strainer with non return valve
–
3m reinforced supply hose
–
Universal coupling to the pressure washer
This enables the pressure washer to draw water up to 0.5 m
above the water level in the source in approximately 15 seconds.
Submerge the 3 m hose in water to displace the air. Connect the
3m supply hose to the pressure washer ensuring that the inlet
strainer remains submerged in the water source. Run the
pressure washer with the gun disconnected until a steady flow of
water appears from the high pressure hose. Stop if this has
this has not been achieved within 25 seconds and check all
the connections. Switch off and connect the gun, lance and
nozzle to operate.
It is important to ensure that all hose and coupling
connections are of good quality, air tight and that all washers
are in good condition and correctly seated in place. Failure
to do so may affect the self priming performance.
Water Tanks with outlet connections
When connecting the pressure washer to a water tank with a
suitable tap outlet, first connect the supply hose (not
provided) to the tank outlet, open the tap to allow the water
to displace all the air in the hose and then connect to the
pressure washer.
MAINTENANCE
Stop, remove plug from the power supply and disconnect
from water supply.
Note: To ensure long and reliable service, carry out the following
maintenance regularly.
Regularly check for obvious defects such as loose fixings, and
worn or damaged components.
Check that covers and guards are undamaged and correctly fitted.
Carry out necessary maintenance or repairs before using.
If the machine should happen to fail despite the care taken in
manufacture and testing, repair should be carried out by an
authorised customer service agent for garden products.
After use/Storage
Turn the main switch off and operate the trigger to drain the water
from the high pressure hose.
Clean the exterior of the machine thoroughly using a soft
brush or cloth. Do not use water, solvents or polishes.
Remove all debris, especially from the ventilation slots.
To ensure good performance, check and clean the adapter
filter. Remove the filter and rinse with warm water to prevent
any foreign matter form clogging the pump.
Remove the spray lance from the spray gun; remove any dirt
from the nozzle hole and rinse. See fig.14.
End of season storage: Drain water out of pump running
motor for a few seconds. Pull trigger to release all water.
Do not place other objects on top of the machine. Store in a
frost-free area.
Ensure cables are not trapped when storing. Do not kink
high pressure hose.
ENVIRONMENT PROTECTION
In order to prevent the machine from damage during transport, it is delivered in a sturdy packaging. Most of the
packaging materials can be recycled. Take these materials to the appropriate recycling locations. Take your unwanted
machines to your local dealer. Here they will be disposed of in an environmentally safe way.
Discarded electric appliances are recyclable and should not be discarded in the domestic waste! Please actively
support us in conserving resources and protecting the environment by returning this appliance to the collection centres
(if available).
DECLARATION OF CONFORMITY
We declare under our sole responsibility that this product is in conformity with the following standards or standardized documents:
EN60335-1:2012+A11:2014+A13:2017+A1:2019+A2:2019+A14:2019; EN60335-2-79:2012; EN62233:2008; EN55014-1:2017+
A11:2020; EN55014-2:2015; EN IEC61000-3-2:2019; EN61000-3-3:2013+A1:2019; EN IEC 61000-3-11:2019; in accordance with
th
e regulations 2006/42/ЕС, 2014/30/ЕU.
NOISE/VIBRATION Measured in accordance with EN60335 the sound pressure level of this tool is 78 dB(A) and the sound power
level is 85,5 dB(A). And the vibration <2.58m/s
2
.
HOCHDRUCKREINIGER
BESTIMMUNGSGEM
ÄßER GEBRAUCH
Das Gerät ist bestimmt für die Reinigung von Flächen und Objekten im Außenbereich, für Geräte, Fahrzeuge und Boote, sofern
das entsprechende Zubehör, wie z. B. von WORCRAFT freigegebene Reinigungsmittel, verwendet werden. Der
bestimmungsgemäße Gebrauch bezieht sich auf eine Umgebungstemperatur zwischen 0 °C und 40 °C. Dieses Produkt ist nicht
für den gewerblichen Einsatz geeignet.
AUSPACKEN (siehe Abb. 1)
Sehr geehrter Kunde, vielen Dank, dass Sie sich für unsere Produkte entschieden haben.
Bi
tte prüfen Sie die Vollständigkeit des Artikels wie im Lieferumfang angegeben. Bei fehlenden Teilen wenden Sie sich bitte an
unser Service Center oder die Verkaufsstelle.
•
Öffnen Sie die Verpackung und nehmen Sie das Gerät vorsichtig heraus.
•
Entfernen Sie das Verpackungsmaterial und alle Verpackungs- und/oder Transportsicherungen.
•
Prüfen Sie, ob alle Artikel geliefert wurden.
•
Untersuchen Sie das Gerät und das Zubehör auf Transportschäden.
•
Bewahren Sie die Verpackung nach Möglichkeit bis zum Ablauf der Garantiezeit auf.
