HIGH PRESSURE WASHER
INTENDED USE
The product is intended for cleaning areas and objects outside the house, tools, vehicles and boats, if the appropriate accessories
such as cleaning agents approved by WORCRAFT are used. Intended use is related to
operation within 0°C and 40°C ambient
temperature. This product should not be used for professional use.
UNPACKING (see fig. 1)
Dear customer, Thank you very much for your choosing our products.
Please check that the article is complete as specified in the scope of delivery. If parts are missing, please contact our service
center or the sales outlet.
•
Open the packaging and take out the equipment with care.
•
Remove the packaging material and any packaging and/or transportation braces .
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for transport damage.
•
If possible, please keep the packaging until the end of the guarantee period.
1
Water filter
6
High pressure hose
11
Spray head
2
Hose hook
7
Soap tank
12
Spray lance
3
Screws
8
Clean needle
13
Spray gun
4
Handle
9
Cable hook
5
Machine body
10
Gun hook
Danger! The equipment and packaging material are not toys. Do not let children play with plastic bags, foils or small parts. There
is a danger of swallowing or suffocating!
TECHNICAL SPECIFICATIONS
Model
HC17-090 / HX13P
Insulation class
II
Voltage
230-240V~ 50Hz
Cable length
5m
Input power
1700w
Water hose length
5m
Rated pressure
9MPa
Sound pressure level
L
pAm
=78dB(A), K
pA
=3dB(A)
Max. pressure
13.5MPa
Sound power level
Lw
A
=85,50dB(A), Kw
A
=3dB(A)
Rated flow
5.5 l/min
Vibration
<2,58m/s
2
, K=1,5m/s
2
Max. flow
7.5 l/min
Weight
6.2kgs
Protection class
IPX5
PRODUCT ELEMENT (see fig. 2)
1
Water filter
7
Soap tank
13
Spray gun
2
Hose hook
8
Clean needle
14
Gun trigger
3
Screws
9
Cable hook
15
ON /OFF switch
4
Handle
10
Gun hook
16
Water outlet
5
Machine body
11
Spray head
17
Cable
6
High pressure hose
12
Spray lance
18
Water inlet
●
NOISE/VIBRATION INFORMATION
The vibration level given in this information sheet has been measured in accordance with a standardised test given in EN 60335 and
may be used to compare one tool with another. It may be used for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications of the tool. However,if the tool is used for different applications,
with different accessories or insertion tools or is poorly maintained, the vibration emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration should also take into account the times when the tool is switched off or when it is
running but not actually doing the job. This may significantly reduce the exposure level over the total working period. Identify
additional safety measures to protect the operator from the effects of vibration such as: maintain the tool and the accessories, keep
the hands warm, organisation of work patterns.
EXPLANATION OF SYMBOLS
Attention!
Pull out mains plug immediately, if the mains cable is
damaged, entangled or severed. Always remove the
mains plug before working on the device.
Read the manual.
Never direct the water jet at people, animals, the unit or
electric components.
Warning: High pressure jets can be dangerous
if subject to misuse.
Electrical appliances must not be
disposed of with the domestic waste.
According to the applicable regulations, the appliance
must never be used on the
drinking water network without a system separator. Use a
separator as per IEC 61770 Type BA.
SAFETY
