13
Programmer/Receiver settings
Comfort I– 6720810964 (2014/07)
▶ Turn the knob to select
ON
or
OFF
, if
ON
is selected the
Programmer will automatically adjust the time in
conjunction with daylight savings time
▶ Press the knob to confirm the selection
▶ Press the return button
to go back to
Time/date
and
turn the knob to select
Format
3. Format
This function allows you to change the way the date is
displayed, by default the format is DD.MM.YYYY. Once the date
and time have been set the date format can be set:
▶ Press the knob to show the date format flashing
▶ Turn the knob to select either:
– DD.MM.YYYY
– MM/DD/YYYY
▶ When the desired format for the date has been selected,
press the knob to confirm and return to
Date format
▶ Turn the knob to select
Time format
▶ Press the knob and the time format is displayed flashing
▶ Turn the knob to select either:
– 12 hour
– 24 hour
▶ Press the knob to confirm once the choice has been made
▶ When the desired format has been selected, turn the knob
to display
Contrast
▶ Press the knob to select
Contrast
▶ Press the knob to select
Contrast
, this function allows you
to adjust the contrast of the screen, by default it is set to 10
▶ The current contrast flashes
▶ Turn the knob to select from 0 to 20 the desired level,
adjusting the contrast increases the intensity of the display
▶ Press the knob to confirm
Press the return button at any time to return to the next higher
level, you can keep pressing the return button until you return
to the normal display.
4. Reset all
Turn the knob to select
Reset all
, this function will reset all the
Programmer User settings back to the factory default settings.
Any customised ON /OFF times for heating or hot water or any
other customised settings will have to be re-entered.
Any default settings are described at the beginning of the
functional descriptions.
Turn the knob to select
Reset all
▶ Press the knob and NO flashes
▶ If a reset is required turn the knob to select YES
▶ Press the knob to confirm
▶ Dashes progress across the screen until four are displayed
briefly, then the display reverts to just showing
Reset all
The Programmer will be reset to factory default settings, as
shown in the table below, any customised ON /OFF times for
heating or hot water will have to be re-entered.
06:30
08:30
16:30
22:30
CH
ON
OFF
ON
OFF
HW
ON
OFF
ON
OFF