11
Programmer/Receiver settings
Comfort I– 6720810964 (2014/07)
5
Programmer/Receiver settings
There are two levels of settings:
1. User
2. Installer
5.1
User
Press the menu button for more than three seconds to enter the
User setting area of the Programmer/Receiver.
Five icons are shown across the top of the display:
1. Heating
2. Hot water
3. Holiday
4. Info
5. Settings
Fig. 13
User menu
Turn the knob to select an icon, the icon is encircled to confirm
the selection, and press the knob to enter that section.
If any of the menu names are accompanied by flashing arrow
heads at each end of the name, this indicates that there are
other menus available by turning the knob.
5.1.1 Heating
This Time program is used to set your required ON and OFF
times for the central heating. The Programmer has default time
settings as shown below:
Time program
Select
Time program
with the knob, and press to enter.
Press the Return button
at any time to return to the
previous higher level.
In the Time program you can select
ON
and
OFF
times for the
central heating, there are three
ON
and three
OFF
programs.
Using the knob you can select various combinations of days, for
example:
1. Mon to Fri
2. Sat and Sun
3. Monday, Tuesday, Wednesday, Thursday, Friday, Saturday
and Sunday
Whether you choose to set the same times for Monday to Friday
and different times for Saturday and Sunday or set times for
individual days the setting operation is the same.
▶ Select the desired day(s) using the knob
▶ Press the knob to select the first Heating
ON
setting
▶ The hours flash
▶ Turn the knob to select the desired hours setting
▶ Press the knob to confirm
▶ The minutes flash
▶ Turn the knob to select the desired minutes
▶ Press the knob to confirm
▶ The first Heating
OFF
hours flash
▶ Turn the knob to select the desired hours setting
▶ Press the knob to confirm
▶ The minutes flash
▶ Turn the knob to select the desired minutes
▶ Press the knob to confirm
▶ Now the second Heating
ON
hours flash
▶ Repeat the process to set the hours and minutes for the
seconding Heating
ON
times
▶ Repeat the process for the second Heating
OFF
times
▶ Repeat the whole process for the third Heating
ON
and
OFF
times, if required
If after setting the third time period you decide that you no
longer require it and wish to disable it, follow these steps:
▶ In the Time program, cycle through time periods 1 and 2 by
just pressing the knob to accept the time setting until you
reach period 3
▶ Turn the knob to set the flashing hours to 00
▶ Press to accept and the minutes flash
▶ Turn the knob clockwise to 00 and then the display
changes to just bars and period 3 is disabled
The display will dim after 20 seconds of
inactivity and remain dimmed until a button
is pressed or the knob is turned/pressed.
After 60 seconds of inactivity the display will
return to normal operation.
06:30
08:30
16:30
22:30
CH
ON
OFF
ON
OFF
6720810964-20.1W
o
2
3
4
5
1
pmam
If the third heating period is not required
repeatedly press the knob to cycle through the
third period without making any settings.