Assembly
9
Greenstar – 6721852556 (2022/11)
Fig. 12 Electric connection
Fig. 13 Vent: HIU and radiator
Fig. 14 Set rotary selector on control unit
Fig. 15 Set room controller, if installed
5.2
Mounting wall mounting bracket
NOTICE
Incorrect assembly can cause material damage.
If the device is assembled incorrectly, it may fall off the wall.
▶ Only install the device on a rigid, solid wall. This wall must be able to
carry the weight of the device and must at least be as large as the
bearing surface of the device.
▶ Only use screws and rawl plugs that are suitable for the wall type and
weight of the device.
The following hole patterns are printed on both sides of the drilling
template:
• Installation on finished wall, wall mounting bracket at top, mounting
plate at bottom.
• Installation on unfinished wall, hole at top for hanging the HIU when
installing cabinet provided by the customer on unfinished wall,
mounting plate at bottom.
▶ Align template with spirit level [1] and attach to wall [2]. Observe the
minimum clearances.
▶ Drill holes for wall mounting bracket [3] and mounting plate
(accessory).
Fig. 16 Drilling template (wall mounting bracket at top), on finished
walls
▶ Attach wall mounting bracket [1] securely to wall. Use appropriate
screws [2] and anchors for this.
Fig. 17 Installing the wall mounting bracket
0010023106-01
0010023106-01
230V
3.
0010025527-01
0010025527-01
6.
3
2
2
1
0010017769-01
0010017769-01
2
1
