http://www.woosim.com
72
4) This command sets the position where data is buffered to the position
specified by ESC T within the printing area defined by ESC W.
5) This command switches the settings for the following commands (in
which the values can be set independently in standard mode and page
mode) to those for page mode;
Set right-side character spacing : ESC SP
Select default line spacing : ESC 2, ESC 3
6) Only valve settings is possible for the following commands in page
mode; these commands are not executed.
Select justification : ESC a
Turn upside-down printing mode on/off : ESC {
Set left margin : GS L
Set printable area width : GS W
7) The printer returns to standard mode when power is turned on, the printer
is reset, or ESC @ is used.
[Reference]
FF, CAN, ESC FF, ESC S, ESC T, ESC W, GS $, GS \
ESC S
[Name]
Select standard mode
[Format]
ASCII
ESC
S
HEX
1B
53
Decimal
27
83
[Description]
Switches from page mode to standard mode.
[Note]
1) This command is effective only in page mode.
2) Data buffered in page mode are cleared.
3) This command sets the print position to the beginning of the line.
4) The printing area set by ESC W are initialized.
5) This command switches the settings for the following commands (in
which the values can be set independently in standard mode and page
mode) to those for standard mode;
