WOOSIM PORTI-W40, Operator'S Manual

Page: 41 / 82

http://www.woosim.com
41
When the LSB is 1, upside-down mode is turned on.
[Note] 1) Only the lowest significant bit of n is valid.
2) This command is enabled only when processed at the beginning of a line
in standard mode.
3) When this command is input in page mode, the printer performs only
internal flag operations.
4) This command does not affect printing in page mode.
5) In upside-down printing mode, the printer rotates the line to be
printed by 180 degree and then prints it.
[Default] n = 0
[Example]
GS ! n
[Name] Select character size
[Format] ASCII GS ! n
HEX 1D 21 n
Decimal 29 33 n
[Range] 0
˺
n
˺
255
[Description] (1
˺
vertical number of times
˺
8, 1
˺
horizontal number of times
˺
8) Selects the character width using bits 0 to 2 and selects the character
height using bits 4 to 7, as follows;