8
Motor Wheel cont
…
To complete the installation of the wheel, fit the nut covers. The left side cover simply pushes on, the
drive side cover should be slid down the cable and fitted as shown below
-
right.
The
red
arrow on the diagram above
-
right shows the typical route for the motor cable (in the case of a
rear hub conversion), with the quick
-
release connector (in the cable) indicated by the solid
red
box. Re-
member to properly secure these cables to the frame using cable
-
ties before riding the bike.
Cable orientation:
It is possible to fit the front motor wheels the wrong way around, and so to avoid any mishaps, please re-
fer to the table below, and ensure that the wheel is fitted correctly. For all
XF07 front hub
installations,
the wheel should be fitted such that the motor cable exits the hub on the right side.
Motor Wheel
Orientation
XF07 Front Hub
Cable exits the
right
side of the hub
XF08 Rear Hub
Cable exits the
right
side of the hub
SWX02 Rear Hub
Cable exits the
right
side of the hub
DGW22C Rear Hub
Cable exits the
right
side of the hub
SX85 Rear Hub
Cable exits the
left
side of the hub
G060500DC Rear Hub
Cable exits the
right
side of the hub
Q70 Front Hub (Brompton Kit)
Cable exits the
left
side of the hub
