11
Speed Sensor:
Note: Most of the motors we supply do not require an external speed sensor, it is built into the hub. In
these cases, you will not receive a speed sensor with your kit, and you can skip to the next page.
The speed sensor consists of two parts, the sensor itself and a magnet that is attached to one of the
spokes. The sensor is normally fitted at the rear. The speed sensor is mounted approximately half
-
way
along the inside of the chain stay as shown in the diagram below (in Red). Simply secure the sensor to the
frame with cable
-
ties, it may be necessary to fit a spacer between the sensor and the frame to bring the
sensor closer to the magnet, otherwise it may not
Run the cable along the chain stay as indicated in
RED
above, securing it with cable
-
ties and ensuring that
the cable is clear of the wheel/tyre. See the next page for the various connections to the controller.
