12
Controller Connections:
Exiting from the bottom of the battery cradle are three or four cables, these are for the speed sensor, the
motor wheel, the pedelec sensor and the modular cable. The modular cable runs up to the handlebars
and connects to the display unit, the thumb
-
throttle and the brake levers. All of the connectors have ar-
rows on them that need to be correctly aligned before pushing the connectors firmly together.
Motor cable
Modular cable
(to handlebars)
Speed sensor
**
Pedelec sensor
**
Note for wheels with hall
-
sensors (9
-
pin motor cable):
If your motor has hall/speed sensors built
-
in, you will have a 9
-
pin connector on the motor cable,
(instead of a 3
-
pin cable) and you will
NOT
have a cable for a speed sensor. The controller for motors
with hall
-
sensors will only have three cables exiting from the bottom of the cradle, instead of four.
