Woodward TG-10E, Installation And Operation Manual

Page: 6 / 44

TG-10E/-13E/-17E Actuator Manual 04045
2 Woodward
Also available is an electric motor-driven TG actuator (Figure 3-5) which can be
mounted in a convenient location and does not require a mechanical drive from
the turbine or an external oil supply.
A UL Listed TG (Class I, Division 2, Groups B, C, and D), is also available for
use in hazardous areas.
References
The following Woodward publications may prove useful:
Number Title
04044 Product Specification, TG-13E & -17E Actuator
25071 Oils for Hydraulic Controls
25075 Commercial Preservation Packaging for Storage of Mechanical-
Hydraulic Controls
36641 Governor Oil Heat Exchanger
50055 Service Bulletin, TG Actuators. Transducer Tightness Check
Regulatory Compliance
The TG Actuator is suitable for use in Class I, Division 2, Groups B, C, and D per
UL for the US or non-hazardous locations only. These listings are limited only to
those units bearing the UL logo.
Wiring must be in accordance with North American Class I, Division 2 wiring
methods as applicable, and in accordance with the authority having jurisdiction.
For use in NEC Class 2 circuits, 30 volts maximum.
WARNING—EXPLOSION HAZARD
Do not remove covers or connect/disconnect electrical connectors unless
power has been switched off or the area is known to be non-hazardous.
Substitution of components may impair suitability for Class I, Division 2.
AVERTISSEMENT—RISQUE D’EXPLOSION
Ne pas enlever les couvercles, ni raccorder/débrancher les prises électriques,
sans vous en assurez auparavant que le système a bien été mis hors tension; ou
que vous vous situez bien dans une zone non explosive.
La substitution de composants peut rendre ce matériel inacceptable pour
les emplacements de Classe I, Division 2.
Regulatory Compliance
European Compliance:
Machinery Directive : Compliance as a component with 98/37/EC
COUNCIL DIRECTIVE of 23 July 1998 on the
approximation of the laws of the Member States
relating to machinery.
North American Compliance:
UL : UL Listed for Class I, Division 2, Groups B, C, & D.
For use in the United States.
UL File E158654