Manual MRM3-2 GB
Woodward
TD_MRM3-2_09.08_GB_Rev.New
31
5.8 Setting of the Clock
When date and time are set, the LED „
“ is on. The following method is used:
Date: year
Y=00
month
M=00
day
D=00
time: hour
h=00
minute
m=00
second
s=00
Immediately when the supply voltage is applied the clock starts with the respective date and time.
The time is buffered against short-term voltage failures (min. 6 minutes).
Note:
The window for setting the clock is behind the measuring value reading. Access to the window via
push-button <SELECT/RESET>.