Woodstar lv 100, Operating Instructions Manual, Page: 27 / 60

27
"EFORE UNDERTAKING ANY MAINTENANCE OR CHECKING WORK
the working area must be cleaned. Keep the necessary
tools within the reach of your hand.
The intervals mentioned herein are based on normal con-
ditions of use. An excessive use of the machine shortens
the intervals accordingly.
Clean the panels, screens and control levers with a soft
cloth. The cloth should be dry or slightly humid with a
neutral cleaning agent. Do not use any solvents like alco-
hol or benzene as they could damage the surfaces.
Store oil and grease outside the reach of unauthorized
personnel. Strictly follow the instructions on the bins.
Avoid direct contact with the skin. Rinse well after use.
Accident prevention standards
The machine may only be operated by people who are
well familiar with the contents of this manual.
"EFOREUSECHECKTHEINTACTNESSANDPERFECTFUNCTIONOF
the safety devices.
"EFORE USE MAKE YOURSELF ALSO FAMILIAR WITH THE CONTROL
mechanisms of the machine, following the operating in-
structions.
The capacity of the machine indicated may not be sur-
passed. In no way may the machine be used for any other
purposes than splitting firewood.
In agreement with your country’s laws, the personnel
must wear adequate, close-fitting working clothes. Jew-
elry like watches, rings and necklaces must be taken off.
Long hair must be protected by a hair net.
The work place should always be tidy and clean. Tools,
accessories and wrenches should lie within reach.
During cleaning or maintenance work, the machine may
never be connected to the mains.
It is strictly prohibited to use the machine with the safety
devices removed or switched off.
It is strictly prohibited to remove or modify the safety de-
vices.
"EFORE UNDERTAKING ANY MAINTENANCE OR ADJUSTING WORK
carefully read and understand the present operating in-
structions.
For a good performance of the machine as well as for
safety reasons, the plan given herein must be adhered to.
In order to prevent accidents, the safety labels must al-
ways be kept clean and legible, and they must be strictly
observed. Any missing labels must be reordered from the
manufacturer and be attached to the correct place.
In case of fire, only fire-fighting powder may be used. Wa-