17
Mounting the wheels, Fig 4.1
Insert the wheel axle with pedal (A) through the two holes
on the oil tank.
)NSERTTHEHEXAGONSOCKETSCREW-" THROUGHTHEWHEEL
axle and tighten it onto the lug (C) with a safety nut.
Then, mount a wheel on each side and secure both with
a cotter pin (D). Slightly bend the cotter pin to prevent it
from falling out.
Fitting the table, Fig. 6
The table can be fitted at three heights (58, 78 and 107
cm) suiting the length of the logs. There are locking hooks
at every position.
0LACETHETABLEINTHEDESIREDSUPPORTS"&ORLOCKINGTHE
table, swing the locking hooks A on both sides down by
Working hints
Stroke limit for short logs, Fig. 7
Lower splitting knife position about 10 cm above table.
s -OVESPLITTINGKNIFETOTHEDESIREDPOSITION
s 2ELEASEONEOPERATINGARM
s 3WITCHMOTOROFF
s 2ELEASETHESECONDOPERATINGARM
s 2ELEASETHELOCKINGSCREW
s 0USHTHESTROKESETRODTOTHETOPUNTILITISSTOPPED
by the spring
s 2ETIGHTENTHELOCKINGSCREW
s 3WITCHMOTORON
s #HECKUPPERPOSITION
Summary of Contents for lv 100
Page 3: ...D Holzspalter 4 35 GB Log splitter CZ WtSD G HYD 34 57 SK WLHSD ND GUHYD lv 100...
Page 58: ...58...
Page 59: ...59...