Woodstar lv 100, Operating Instructions Manual, Page: 21 / 60

21
s "EFOREYOUMOVETHELOGSPLITTERCLOSETHECAPAGAIN
in order not to lose any oil.
If the hydraulic system is not vented, the enclosed air will
damage the gaskets and with it the complete log splitter.
Switching on and off, Fig. 10
Press the green button for switching on.
Press the red button for switching off.
Note: Check the function of the ON/OFF unit before every
use by switching on and off once.
Restarting safety in case of current interruption (no-volt re-
lease).
In case of current failure, inadvertent pulling of the plug,
or a defective fuse, the machine is switched off automati-
cally.
For switching on again, press anew the green button of
the switch unit.
End of work
s -OVETHESPLITTINGKNIFETOTHELOWERPOSITION
s 2ELEASEONEOPERATINGARM
s 3WITCHTHEMACHINEOFFANDPULLTHEPOWERPLUG
s #LOSETHEVENTINGCAP
s /BSERVETHEGENERALMAINTENANCEINSTRUCTIONS
D
Electrical connection
Check electrical connection cables regularly for damage.
Ensure that the connecting cable is not attached to the
mains when you are checking it.
Electrical connecting cables must correspond to the rel-
evant VDE and DIN regulations. Only use connecting ca-
bles with the code H 07 RN.
The type designation must be printed on the connecting
cable by regulation.
Faulty electrical connecting cables
Insulation damage often occurs at electrical connecting
cables.
Causes include:
s 0INCHPOINTSWHENCONNECTINGCABLESARERUNTHROUGH
window or door gaps.
s +INKSRESULTINGFROMINCORRECTATTACHMENTORLAYINGOF
the connection cable.
s #UTS RESULTING FROM RUNNING OVER THE CONNECTING CA
-
ble.
s )NSULATIONDAMAGERESULTINGFROMFORCEFULLYPULLINGOUT
of the wall socket.
s #RACKSTHROUGHAGINGOFINSULATION
Such defective electrical connection cables must not be
used as the insulation damage makes them extremely
hazardous.