Woodstar lv 100, Operating Instructions Manual, Page: 15 / 60

15
chapter Authorized use and in the entire operating
manual.
Transport
Transport by hand, Fig. 3
For transport, the splitting knife A must be completely
MOVEDDOWN3LIGHTLYTILTTHELOGSPLITTERWITHHANDLE"ON
the splitting column until the machine is inclined on the
wheels and can be moved.
Transport by crane:
Never lift the machine on the splitting knife!
Storing conditions:
The following conditions are required:
s $RYSTORINGPLACEUNDERROOF
s -AXIMUMHUMIDITY
s 4EMPERATURERANGE #TO #
The machine should operate under the following environ-
mental conditions:
minimum maximum recommended
Temperature 5 C° 40 C° 16 C°
Humidity 95 % 70 %
Setting up
Prepare the work place where the machine is to stand.
Create sufficient space in order to allow safe working
without disturbance.
The machine has been designed for working on a level
surface. It must therefore be set up in a stable position
on firm ground.
Assembly
For reasons of packing, your Woodster log splitter is not
completely assembled.
Fitting the operating arms, Fig. 4
Insert the control arm (A) in the rocker switch (C), and
s
screw it in place with the hexagon bolt (D), the washer
(E) and the safety nut. Tighten the lock nut so the con-
trol arm can still be moved.
.OWMOUNTTHECONTROLARM" ONTHERIGHTFOLLOWING s
the method described above.
Mount the hoop guards (F) to both control arms, using
s
2 crosshead screws (G) in each case.