Setup & Operation
Tracking the blade
2
2-16
HDSdoc021716
Setup & Operation
2.7
Tracking the blade
1.
Turn the key switch to #2 position.
2.
Manually spin one of the blade wheels until the blade positions itself on the blade wheels.
3.
Check if the blade is properly positioned on the blade wheels.
See Figure 2-7
Position 1 1/4" wide blades so the gullet is 3.0 mm out from the edge of the blade
wheel(±1,5 mm). Position 1 1/2" wide blades so the gullet is 4.5 mm out from the edge of the blade wheel
(±1,5 mm).
FIG. 2-7
SM0044D
1 1/2"
Blade
± 1 mm (0.04”)
1 1/4"
Blade
3.0 mm (0.12”)
± 1 mm (0.04”)
4.5 mm (0.18”)
