Woodhead SST DeviceNet 5136-DNS-200X Page 20 User Manual Download | Manualshive

Page: 20 / 52

background image

715-0025 v 1.04 CCB # 33

5136-DNS-200X DeviceNet Slave Adapter User’s Guide

© 1999-2002 SST, a division of Woodhead Canada Limited

14

Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions

established on page ii of this document.

14

4

Operation

4.1 Overview

The 5136-DNS-200X DeviceNet Adapter is an IP67 compliant communications adapter for interfacing to Siemens ET200X
Expansion Modules. It is a module device capable of operating out of the box without any special configuration software, but
to take full advantage of advanced diagnostics and features, a configuration tool is required.

4.2 Operating Modes

The 5136-DNS-200X DeviceNet Slave Adapter operates in one of two modes: Automatic Configuration and User
Configured.

4.2.1 Automatic Configuration Mode

When operating in Automatic Configuration mode, the 5136-DNS-200X DeviceNet Adapter configures its I/O sizes, module
parameterization data and configuration data according to the combination of ET200X expansion modules present at power-
up or reset.

•

Expansion module parameter data cannot be specified

•

DeviceNet Configuration Consistency Value is based on the automatically generated I/O configuration bytes

•

I/O configuration cannot be verified – DeviceNet master is responsible for verifying configuration by examining I/O
sizes. The adapter module is unable to differentiate modules of similar configuration types (i.e. 2A Discrete Output
vs. a 0.5A Discrete Output module).

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

«
...
18
19
20
21
22
...
»

Summary of Contents for SST DeviceNet 5136-DNS-200X





















































Reviews:

No comments

Related manuals for SST DeviceNet 5136-DNS-200X

Brand: Albrecht Pages: 32

Brand: M-system Pages: 7

Brand: Enduro Pages: 36

Brand: Ruijie Networks Pages: 19

Smart Wireless THUM Adapter

Brand: Emerson Pages: 28

Brand: Emerson Pages: 48

Smart Wireless THUM Adapter

Brand: Emerson Pages: 62

Brand: Lindy Pages: 2

Brand: Mitsubishi Pages: 250

Plus-X Dual IP-8

Brand: Burk Pages: 11

Brand: Bplus Technology Pages: 8

Brand: Bplus Technology Pages: 10

AC/DC Power Adapter

Brand: Lind Electronics Pages: 2

Brand: TRENDnet Pages: 24

Brand: Prudent Way Pages: 7

Brand: Igo Pages: 2

Brand: Paser Pages: 6

Brand: TRENDnet Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands