715-0025 v 1.04 CCB # 33
5136-DNS-200X DeviceNet Slave Adapter User’s Guide
© 1999-2002 SST, a division of Woodhead Canada Limited
9
Use, duplication or disclosure of this document or any of the information contained herein is subject to the restrictions
established on page ii of this document.
9
3.2 Connecting to the Network
Connections are provided on the 200X via cable seal housing assemblies and they must be field wired according to the pin
assignments in table 1.
Pin Numbers
Connection
1
2
3
4
5
6
DC 24V (Module)
NC
+24VDC
(module)
Return
(module)
NC +24VDC
(module)
Return
(module)
DeviceNet™ CAN_H
SHIELD
SHIELD
CAN_L
V+
V-
DC 24V (Load)
NC
+24VDC
(load)
Return
(load)
NC +24VDC
(load)
Return
(load)
NOTE
24 VDC power for module power, network interface power, input current and output load current
must be provided by Class 2 power supplies.
3.2.1 V+, V-
These are the DeviceNet network power supply terminals that provide power for the Optically isolated network interface of
the 5136-DNS-200X.
3.2.2 CANH, CANL
These are the CAN communication bus signals.
3.2.3 SHIELD
Connect the network cable shield to this terminal. This terminal is snubbed to the PC chassis ground. The shield should be
connected directly to earth ground at only one point in the network.
3.2.4 Module Power
The 24V DC Module power terminal provides power to the logic portion of the 5136-DNS-200X module as well as the
expansion modules
3.2.5 Load Power
The 24V DC Load power terminal provides output power for the 5136-DNS-200X expansion modules.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
