B
A
5. MAINTENANCE
-9-
WARNING
Handle the tools with protective gloves.
4.2.3 INSTALL THE FRAME
- Match frame A with mounting holes on frame B.
- Connect A to B with eight hexagon screws 1, eight
washers 2 and eight washers 3.
- Be sure to tighten all bolts and nuts.
5.1 CHANGING AND SETTING THE BLADE
- This product is manufactured with blade for cutting
wood. To change the blade, loosen the lock handle A and
remove the blade.
- After change blade, firstly adjust tension handle A, rotate
upper wheel and adjust handle B, make the blade in the
middle of rubber wheel. Then tighten the handle C.
FIG.5.2
5.2 BLADE GUIDING
-The blade guide can provide precise guidance for cutting
of blade.Before using, try to adjust the bearing on the
upper and lower guide to be close to the saw blade. It is
best to keep the clearance between the guide to within
0.5mm, but do not directly contact with the saw blade,
otherwise the guide bearing will be easily damaged.
- Adjust two upper guide blocks B so that the upper guide
blocks will hold the saw blade; Adjust two lower guide
blocks A to make the lower guide blocks clamp the saw
blade, this will guarantee the deformation of the saw
blade in the cutting process.
FIG.4.2.3
FIG.5.1
B
A
1
2
3
B
C
A
