-10-
5.4 SETTING CUTTING WIDTH
- Put the upper guide most closely to the wood.When
adjusting, loosen handle A at the back of the upper guide,
turn the handwheel B to adjust the upper guide to the
wood, then lock the handle A.
FIG.5.4
FIG.5.3
5.3 FIX FLANGE
- Adjust the installation of fixed flange B so that it is
matched with gear connecting rod D without interference.
When rotating the handwheel A, vertical support C can
slide smoothly on the guide rail, and tighten two hexagon
screws on B.
A
C
D
B
B
A
