-8-
A Head/motor assembly
B Column assembly and table bracket
C Table
D Base
E Chuck
F Chuck key
G Table lock handle
H Hex head bolts (4)
I Table crank handle
J Hex keys (2)
K Feed and speed handles (4)
M Table adjustment wrench
N Wedge
5. FITTING AND OPERATING OF MACHINE
5.1 COLUMN ASSEMBLY TO BASE
- Place the column tube (1) on the base (2), aligning the
column support holes to the base holes.FIG.5.1
- Install a hex head bolt (3) in each column support hole
and tighten bolts using the adjustable wrench.FIG.5.1
FIG.5.1
A
B
C
D
K
E
F
J
H
N
I G
M
The column assembly (column, column support, rack, rack collar, and table support bracket) must be attached to the
base. The table and table support handles must be attached to the table support bracket. The motor housing must be
attached to the column.
If any part is missing or damaged, do not plug the bench drill press in until the missing or damaged part is repaired or
replaced, and assembly is complete.
WARNING
Tools needed for assembly
- Adjustable wrench
- Screwdriver
- Hammer and block of wood