Woodbridge SRP-N, Owner'S Operation And Installation Manual

Page: 8 / 20

A. This appliance is equipped with an ignition device which automatically lights the pilot. Do not try to light
the pilot by hand .
B.
BEFORE OPERATING smell all around the appliance area for gas. Be sure to smell next to the floor because
some gas is heavier than air and will settle on the floor.
WHAT TO DO IF YOU SMELL GAS:
•
Do not try to light any appliance.
•
Do not touch any electric switch; do not use any phone in your building.
•
Immediately call your gas supplier from a neighbor's phone.
Follow the gas supplier's instructions.
•
If you cannot reach your gas supplier, call the fire department.
C.
Main gas valve in this appliance is not servic e able and does not have any control knobs or switches to operate.
Do not remove heat shield s covering the valve
and electronic devices
; do not try to repa i r or modify the valve
as it may result in a fire or explosion.
Call a qualified service technician if you have any safety concerns.
D.
Do not use this appliance if any part of it has been under water. Immediately call a qualified service technician
to inspect the appliance and to replace any part of the control system and any gas control that has been under
water.
LIGHTING
INSTRUCTION
FOR YOUR SAFETY READ BEFORE OPERATING
LIGHTING FOR THE FIRST TIME
LEAK TESTING
1. Follow the pipe from the gas supply line connection to the gas valve. Check connection for leaks with soap
and water mixture.
2. Next check for gas leaks at the burner with soap and water mixture.
3. Check the pilot for gas leaks with soap and water mixture.
If you do not follow these instruction exactly,
a fire or explosion may result causing property
damage, personal injury or loss of life.
WARNING
Never use an open flame to check for gas leak.
DANGER
8