OPERATION
Start-up Settings of the Controller
OPERATION
SW-10doc111419
2-3
2
2.2
Start-up Settings of the Controller
1. Setting the Input Divider (entered only once, at the first start-up)
Switch on the controller.
When the text “SW-10” appears on the display, press and hold
until the divider value appears
on the lower display.
Enter the correct value of the divider (depending on the up/down system of the machine) using the
keypad (for LT15 sawmills, the divider value should be
20,
for
LT20, LT40 and WM1000 sawmills,
the divider value should be
5
).
Press
to save the entered divider value.
„
SAVE
” will appear in the display window.
2. Entering the Blade Kerf Thickness
On initial start-up or after replacement of the blade with another one with a different thickness or different
tooth set, the kerf value should be entered.
Press and hold
until the small zero and the current kerf setting appear on the lower display.
Enter the kerf value.
NOTE:
We recommend using Wood-Mizer blades only. For the Wood-Mizer
blades, the kerf value should be 2mm, so you should press “2” and “0”
buttons.
Kerf values with an accuracy of up to 0.1 mm can be entered into the memory
of SW-10 Setworks.
