Safety
Planer/moulder operation
Safety
EGdoc081920
2-5
2
When planing smaller material, it should be stiffened/extended, e.g.
with a longer piece of wood.
Never stand in front of the material being fed or received, because it
may suddenly kickback uncontrollably towards the operator. This
applies to both the in and outfeed sides, although the risk is higher on
the infeed side.
DANGER!
Planing/moulding is possible only in direction shown below.
Arrow indicates planning direction. Never try planing/moulding in the
opposite direction.
Use proper maintenance procedures
DANGER!
Make sure all electrical installation, service and/or
maintenance work is performed by a qualified electrician and is in
accordance with applicable electrical codes.
DANGER!
Hazardous voltage inside the electric boxes and at the
motor can cause shock, burns, or death. Disconnect and lock out
power supply before servicing! Keep all electrical component covers
FIG. 2-1 MP360
