SETUP & OPERATION
Grind Depth Adjustment
SETUP & OPERATION
ISHdoc063008
2-12
2
2.8
Grind Depth Adjustment
Tooth height is determined by how much material is removed from the gullet of the blade.
The Wood-Mizer sharpener is equipped with a grind depth adjustment bolt that controls
how far the grinding head comes down and therefore controls the gullet grind.
(See
Figure 2-10.)
CAUTION!
The grind depth adjustment bolt is factory-set
and should not need to be readjusted. The gullet grind
should be adjusted by setting the blade height with the
blade height adjustment knob. (
NOTE:
Depth grind may be affected as the grinding wheel passes over blade welds.
FIG. 2-9
CBNSH07C
Grind Depth
AdjustmentBolt
Blade Height
Adjustment Knob
