Alignment
Blade Wheel Alignment
6
6-4
15doc120709
Alignment
8.
Recheck the vertical tilt of the idle-side blade wheel with the blade guide alignment tool. Readjust the blade
wheel as necessary until the front and rear of the tool are the same distance from the bed rail (within 1/16"
[1.5 mm]).
9.
Check the position of the blade on the idle-side blade wheel.
See Figure 6-5.
The horizontal tilt of the blade wheel should be adjusted so that the gullet of an 1-1/4" blade
is 1/8" (3 mm) out from the front edge of the wheel (±1/32 [0.75 mm]).
FIG. 6-4
FIG. 6-5
Adjust vertical adjustment
screws up to tilt idle-side
blade wheel down; Adjust
screws down to tilt wheel up
150060
3.0 mm
± 1.0 mm
1 1/4"
Blade
Blade
Summary of Contents for LT15 M2 E11S
Page 1: ...Table of Contents Section Page Table of Contents SW 07doc1207091...
Page 2: ......
Page 6: ...6 15doc120709...