Wood-mizer 1996 LT25, Safety, Setup, Operation & Maintenance Manual

Page: 36 / 104

Setup & Operation
Blade Guide Arm Operation
2
2-16 2596doc091809 Setup & Operation
2.9 Blade Guide Arm Operation
1. Look down the length of the log to see its maximum width. The outer blade guide should
be adjusted to clear the widest section of the log by less than 1" (25.4 mm).
2. Use the blade guide arm knob to adjust the outer blade guide as necessary. Pull the
blade guide arm knob out away from the mill to move the arm in. Push it in toward the mill
to move the arm out.
See Figure 2-9.
FIG. 2-9