Wolturnus Active Wheelchair Manual 2019
Accessories and equipment
Adjusting doubled plated seat:
With the extra plate, the possibility of length adjustment increases beyond the adjustment
given by the single plate.
• Remove the seat cushion.
•
Loosen the screws that fix the seat plate, with a 4 mm Allen key and 10 mm wrench.
•
Push or pull the seat plate to the desired position.
• Tighten the screws.
•
Fit the seat cushion.
7.5 Seat flip with electric actuator
The seat angle can be selected by an electric actuator instead of the standard gas damper.
When adjusting the seat angle:
•
Turn on the anti-tip. This ensures that the chair does not tip backwards if the seat is angled
too much.
•
The seat is adjusted up and down with the remote control.
7.6 Push handles
A-Run comfort wheelchair is delivered as standard with angle adjustable push handle. In ad
-
dition, you can choose between:
•
Straight push handle with either an adjustable or non adjustable angle feature
•
Drop-shaped fixed-angle push handle
7.7 Tipping pedal
Tipping pedal makes it easier for a companions to tilt the wheelchair when driving over ob
-
stacles like steps and curb. Tighten the pedal while tilting the chair backwards using the push
handles.
7.8 Sideguards
Sideguards ensure that the wearer’s clothes are kept clear of the rear wheels and prevent the
clothes from being soiled by splashes and dirt from the wheels. Sideguards are available in
several varieties, including ABS, Dibond and Aluminum, and can be fastened in different ways
as needed. Wolturnus A/S archives a template for specially crafted page pieces, which can sub
-
sequently be ordered.
Adjustment of the seat angle may cause displacement of the wheelchair center of gravity,
and the risk of tilting backwards may increase. After adjusting the seat angle, check the cen
-
ter of gravity and adjust if necessary before using the wheelchair (see section 6.12).
WARNING!
A-Run
33
Summary of Contents for Dalton
Page 2: ......
Page 49: ...Wolturnus Active Wheelchair Manual 2019 A Run 49 ...
