Wolturnus Active Wheelchair Manual 2019
Adjustment and set-up
Adjusting angle 1, of tip guard arm:
•
Loosen and remove the bolt using a 4 mm Allen key (Fig. 39).
•
Adjust the tip protection angle in one of three possible positions (Fig. 40).
•
Insert the bolt and tighten it.
Adjusting angle 2, at rear fork:
•
Loosen and remove the three bolts with a 5 mm Allen key (Fig. 41).
•
Choose one of the three positions
•
Reapply the bolt and tighten them
When the wheelchair is equipped with two anti-tip wheels, it is important that they have the
same length and angle. Unless both anti-tip wheels are the same, the wheelchair will come
out of balance with any backwards directed tipping.
CAUTION!
Fig. 39 Loosen bolt
Fig. 40 Adjust guard arm
Fig. 41 Remove the three bolts
28
Summary of Contents for Dalton
Page 2: ......
Page 49: ...Wolturnus Active Wheelchair Manual 2019 A Run 49 ...
