WOLTURNUS Dalton, User Manual

Page: 25 / 50

Wolturnus Active Wheelchair Manual 2019
Adjustment and set-up
6.13 Adjusting the footrest
A-Run comfort wheelchair can be provided with either foot support (model Tukan) or double-
folding footrest (model Dalton). Both models can be angularly adjusted and height adjustable
in jumps of 15 mm.
Height adjustment of footrest and Angle adjustment of footrest
Model Tukan:
• Loosen and remove both nuts on the back of the frame using a 3 mm Allen key and an 8
mm wrench (Fig. 32).
• Remove the cranes so that the footrest can slide freely in the front windows.
• Raise or lower the footrest to the desired height so that the holes in the footrest and front
frame fit together. Make sure that the footrest is not crooked.
• Fit the brackets and nuts and tighten them (Tightening torque 4 Nm / 3.0 ft.lbf / 35 in.lbf).
If the nuts are tightened so much, the frame may bend.
• Loosen the nuts on the mounting bracket on the underside of the footplate with a 4 mm
Allen key and 10 mm wrench (Figure 34).
• Turn the footplate to the desired angle.
• Tighten the nuts.
Fig. 32 Remove both nuts on the front Fig. 34 Loosen the nuts on the footrest
A-Run
25