~
60
~
2
F
LAT PART OF THE PLASTIC FRAME OF THE CARBON FILTER
3
G
AP TO INSERT THE CARBON FILTER
4
H
OUSING OF THE EXTRACTOR HOOD
5
M
OTOR HOUSING
2.
If you want to replace the carbon filter (see also chapter 6.2 R
EPLACING OF THE
CARBON FILTER
), pull it out of the gap carefully and replace it by a new one.
WARNING!
Always ensure that the carbon filter is inserted properly.
NOTICE!
The suction capacity is decreased by an installed carbon filter.
NOTICE!
Depending on frequency of use, replace the carbon filter every
three to six months. Clean the grease filter(s) regularly for proper operation
of the motor (s. chapter C
LEANING AND MAINTENANCE
).
3.2 Grease filter(s)
Always
ensure that the grease filter(s) is / are
inserted properly
.
Clean the grease filter(s)
regularly
(s. chapter C
LEANING AND MAINTENANCE
).
WARNING!
Operate the appliance with inserted grease filters
only
.
Otherwise, recirculating-transported fat will deposit in the appliance and
the exhaust system. RISK OF FIRE!
4. Control panel and operation
4.1 Control panel
NOTICE!
Never touch two sensors simultaneously.
