~
64
~
❖
You can also use this sensor to increase the countdown time of the timer.
I
LLUMINANT
:
« O
N
/ O
FF
»
❖
You can use the sensor « I
LLUMINANT
»
to switch on or off the
ILLUMINANT
of the appliance.
WARNING!
The illuminant
must not
be covered by thermal insulation
or other materials. RISK OF FIRE!
CAUTION!
Do not
touch the illuminant within 30 minutes after using
the appliance. RISK OF BURNS!
NOTICE!
Only switch on the illuminant while the appliance is operating.
Do not switch on the illuminant to illuminate the room.
4.2.1 Power levels
❖
The extractor hood is equipped with
9 power levels
(9 motor speeds) and a
power level «
0
» (= motor is off /
STANDBY MODE
).
❖
Use the
SENSORS
«
INCREASE
»
and / or
«
DECREASE
»
to set the power
level (motor speed).
❖
The currently set power level (0 / 1 / 2 / 3 / 4 / 5 / 6 / 7 / 8 or 9) is indicated
on the digital display.
When you set the power level (motor speed) to «
0
», the extractor hood returns
to
STANDBY MODE
.
You
must
always
set the power level (motor speed) to «
0
» using the
«
DECREASE
» -
SENSOR
before
you can retract (= switch off) the extractor
hood using the «
ON
/
OFF
» -
SENSOR
.
0
P
OWER LEVEL
« 0 » =
THE MOTOR IS SWITCHED OFF
