WOLFGANG WARMBIER
13
6
Database Functions
The displayed measurement data for each measurement can be saved to
an internal database, with or without a comment. A data record must be
created and allocated to a specific memory address in order to be able to
assign the individual measurement values to different locations, depart-
ments and systems.
6.1
Creating a Data Record – Data Function
➭
Press the
Data key
.
➭
First create the desired memory address with the help of the softkeys.
After acknowledging with the
START
key (press at center), the cursor
appears at the first data entry position (
LOCATION)
➭
With the help of the softkeys, entries can be made to the
LOCATION
,
DEPARTMENT
,
Nr.
and
INDEX
fields one after the other, and a designation
can be entered for the test object.
Entering Data:
Display the desired alphanumeric character by pressing the
or
the
key, and then select the character with the corresponding
softkey.
Control characters can be entered in the same way and have the fol-
lowing meanings:
¬:
Move cursor to the left (without deleting data)
®:
Move cursor to the right (without deleting data)
¿:
Same function as the
START
key
After each character is selected, the cursor moves one position to the
right. If
¿
or the
START
key is activated (press at center), the cursor
moves to the next entry field. After the fields
LOCATION
,
DEPARTMENT, Nr.
and
INDEX
have been completed, and after acknowledgement has
been confirmed with the
¿
softkey, the data fields are displayed as in-
verse images. After the
¿
softkey has been activated once again, a
designation for the selected test object can be entered.
Note
☞
These entries are required by the PC software in order to enter
measurement values into the database, and to generate reports
with this information automatically.
Summary of Contents for METRISO 2000
Page 23: ...WOLFGANG WARMBIER 23...
