36
03/2009
8.2
Adjusting the running wheels
If the machine produces a slanted sanding, the planar setting has to be adjusted.
After replacing the sanding roller or the running wheels, the planar setting always has to
be readjusted. For an exact planar sanding, the sanding roller and the running
wheels must be flush.
The right running wheel is adjustable. The left wheel does not adjust.
How to adjust the running wheels:
1. Switch off the machine.
2. Unplug the power cable from the mains supply.
3. Lay the machine on its left side.
4. Use the running wheel adjustment gauge ( 4 ) to determine the position of the
left running wheel ( 1 ).
5. Loosen the lock nut ( 2 ) of the star-shaped knob on the running gear lever behind the
right wheel ( 3 ).
1
4
3
2
