22
03/2009
7.4
Replacing the abrasive belt
Caution! Risk of injury if the machine starts unintentionally!
When replacing the abrasive belt, there is a risk of starting the machine unintentionally.
Unplug the machine from the mains supply before working on the abrasive belt.
Caution! Risk of cutting your hands!
The sanding grains of the abrasive belt have sharp edges. Always wear safety gloves
when replacing the abrasive belt.
How to replace the abrasive belt:
1. Switch off the machine.
2. Unplug the power cable from the mains supply.
3. Open the roller cover ( 1 ) and the hood ( 2 ).
4. Fold the tension lever ( 3 ) to the front.
The tension of the abrasive belt ( 4 ) will be slackened.
Pull it out to the side.
5. Insert a new abrasive belt.
Pay attention to the rotating direction of the sanding roller ( 5 ) and the abrasive belt ( 4 ).
6. Fold the tension lever ( 3 ) to the back to take up slack of the new abrasive belt.
7. Close the roller cover ( 1 ) and the hood ( 2 ).
3
1
2
4
