27
03/2009
Due to the space needed for the machine operator and the machine itself, the area of
approximately 1.5 m to the wall behind the sander will not be sanded.
Turn the machine 180° and sand the remaining area of the floor. Again sand in
overlapping lanes from left to right.
Pay attention to a shoulderfree transition to the area already sanded.
Note!
To obtain a nice surface of the floor, several sanding rounds are required in general.
For detailed information about the proper abrasive grit, sanding pressure and
sanding direction for the individual sanding rounds, please refer to our brochure:
Sanding parquet and plank floors
with the FRANK parquet floor sander
COBRA
and the FRANK edge sander
GECKO S
