Wolf TYG48, Installation & Operation Manual

Page: 8 / 24

-
8
-
way to the right. The height of the burner flame and cooking plate temperature can be
adjusted by turning the burner control knob while viewing burner through the burner sight
holes.
The griddle and its parts are hot. Use care when operating,
cleaning or servicing the griddle
PILOT LIGHTING PROCEDURE
1. Turn the main gas shut-off valve and
burner control knob to the OFF position.
Wait 5 minutes to allow any gas that
may have accumulated in the burner
compartment to escape.
2. Turn the main gas shut-off valve ON.
3. Depress and hold the safety valve
button while lighting the pilot. You will
have to reach under the front of the unit
to light with an outside ignition source
(such as a lit taper, etc.) while viewing
thru the pilot sight hole.
4.
When the gas at the pilot has been
burning for about 45 seconds, release
the safety valve button. If the pilot does
not remain lit, repeat the operation
allowing more time before releasing
the button. The amount of time
necessary to hold the safety valve
button will increase at the initial
installation of the unit and if the main
gas supply has been turned off for a
long period of time. It may be
necessary to adjust the pilot valve to
increase gas to the pilot.
6. If after completing steps 1-4 pilot does
not light, turn off the main gas shut-off
valve and contact an authorized
service contractor.
Fig. 7
Safety Valve Button
Pilot Adjustment Valve
Burner Control Knob
Pilot Sight Hole
Pilot Outside Ignition Source