Installation / Electrical connection
CGB-2/CGW-2/CGS-2 and BWL-1S
MGK-2
TOB
X
Open the cover of the installation
compartment on the back of the
control unit for the Link
X
Open the control unit cover
X
Open the terminal box cover
HCM-2
X
Plug the connecting cable inside
the installation compartment into
the WOLF Link home.
X
Plug the supplied connecting cable into the PCB and the WOLF
Link home.
WOLF Link
home
WOLF Link
home
X
Clip the WOLF Link home in at
the designated location
X
Clip the WOLF Link home in at
the designated location
X
Clip the WOLF Link home in at
the designated location
HCM-2
X
In the case of network connection by network cable (LAN), plug this into the RJ45 socket on the WOLF
Link home.
X
Switch on the appliance and associated components
X
You can now use the WOLF Link home (see instructions on the rear).
X
Reattach the covers by following the instructions in reverse order.
X
Place the additional label on the housing of the heating appliance so that you can access the information
without opening the appliance.
9
3066086_201803