Wolf Link home, Installation And Operating Instructions Manual, Page: 7 / 12

Overview
3.6 Function of the pushbutton
The LEDs will begin to light up when the button is pressed. Release the
button when the LED display is correct.
Function Duration of press LED display
Start access point Brief <1 None
Activate WPS ≥ 3s and < 5s
Green and yellow
LEDs
All other functions of the button are covered in the FAQ.
3.7 Meaning of the LEDs
Interface LED Actuation Meaning
Portal
Green
Off No connection to WOLF Portal
On
Connection to WOLF Portal
successful
Flashing Connecting...
eBus / Modbus
Yellow
Off No eBus or Modbus connection
On
eBus and Modbus connection
established and system
detection completed
Flashing System detection active
WLAN
Red
Off WLAN disabled
On WLAN connection established
Flashing Connecting...
On for a long time,
briefly off
Access point active
Flashing quickly WPS active
3.8 Specification
Designation
Power supply
WOLF Link home: 24 VDC via PCB
WOLF Link pro: 5VDC via Micro USB
and included power
supply or 24VDC via
“power supply terminals”
WLAN standard
IEEE 802.11b/g/n, 2.4GHz, channel 1 to
13
LAN RJ45, 10/100 Mbit
WOLF Link home (WxHxD) in mm 47x100x18
WOLF Link pro (WxHxD) in mm 83x160x31
Operating temperature
0... 60°C / 20-90% rel. hum.,
non-condensing
Storage conditions
-30... 70°C / 0…95% rel. hum.,
non-condensing
WOLF Link pro IP rating IP 30
7
3066086_201803