Wolf Link home Installation And Operating Instructions Manual Download Page 3

Documentation information

Documentation information

1.1 

Other applicable documents

Installation and operating instructions for the product and all accessory 

modules and further accessories.

1.2 

Safekeeping of these documents

The system user or operator should ensure the safekeeping of all instruction 

manuals.

Hand over these installation and operating instructions, along with all other 

applicable manuals, to the system user or operator.

1.3 

Applicability of these instructions

These installation and operating instructions apply to the WOLF Link home 

and WOLF Link pro interface modules both referred to as Link hereinafter.

1.4 

Symbols and warnings used

Symbol for additional information

 

X

 

Symbol for a necessary action

Warnings in the text warn you of possible risks before the start of an 

instruction. The warnings provide you with information on the possible 

severity of the risk using a pictogram and a keyword

Pictogram

Keyword

Explanation

Danger!

Risk to life or risk of serious injury

Danger!

Risk to life or risk of serious injury through 

electrocution

Warning!

Risk of minor injury

Caution!

Possible material damage

1.5 

Layout of warnings

You will recognise warnings in these instructions by pictograms and a 

line above and below the warning section. These warnings are laid out as 

follows:

Keyword

Type and source of risk.

Explanation of the risk.

 

X

Action to prevent the risk.

3

3066086_201803

Summary of Contents for Link home













Reviews: