Installation / Electrical connection
X
Please refer to the documentation for each Modbus device for information
about installation and configuration
X
Connect the eBUS cable to the eBUS service connection of your heating
appliance or connect the interface Modul with a two-core lead (cross
section >0.5 mm²) to the eBUS terminals of your heating appliance or
accessory controller. In so doing, pay attention to the polarity.
X
You can now use the WOLF Link pro (see instructions on the rear).
X
Next, reattach the cover and screw it in place.
Use a shielded cable (CAT5 minimum) to connect the Modbus.
4.4
Decommissioning and disposal
4.4.1
Decommissioning
X
When decommissioning the interface module, follow the installation
sequence in reverse order.
X
Dispose of the interface module correctly.
4.4.2
Disposal and recycling
Appliance
At the end of its service life, do not dispose of the interface module in the
household waste.
X
Ensure that the Link interface module and any accessories used are
disposed of correctly.
Packaging
X
Ensure that the Link interface module and any accessories used are
disposed of correctly.
KLM-XL air
conditioning ventilation
module connection
WOLF Power Systems
connection
A B COM
-
(B)
GND
+
(A)
11
3066086_201803